User Account Management Commands

 

Command Reference

<username> - is the login user name. md5 - md5 authentication method. sha - sha authentication method. none - no use authentication method.

no - This command sets the authentication protocol to be used for the specified login user to none. The <username> is the login user name for which the specified authentication protocol will be used.

Default Setting

No authentication

Command Mode

Global Config

7.8.2.3username snmpv3 encryption

This command specifies the encryption protocol and key to be used for the specified login user. The valid encryption protocols are none or des. The des protocol requires a key, which can be specified on the command line. The key may be up to 16 characters. If the des protocol is specified but a key is not provided, the user will be prompted to enter the key. If none is specified, a key must not be provided. The <username> is the login user name for which the specified encryption protocol will be used.

Syntax

username snmpv3 encryption <username> {none des [<key>]} no username snmpv3 encryption <username>

<username> - is the login user name. des - des encryption protocol. none - no encryption protocol.

no - This command sets the encryption protocol to none. The <username> is the login user name for which the specified encryption protocol will be used.

Default Setting

No encryption

Command Mode

Global Config

219

Intelligent Blade Panel Module

 

Page 220
Image 220
Fujitsu BX600 manual Username snmpv3 encryption