Conversion from a floorstand model to a rack model
ÊIf necessary, lay the server on its
Get a second person to help you do this. The server can weigh around 25 - 40 kg (depending on the configuration).
Make sure that the server feet protrude over the table edge.
1 |
1 |
1 |
1 |
Figure 72: Removing the server feet
ÊRemove the four screws on each of the server feet (1).
ÊRemove the server feet.
I The server feet are no longer required. | ||
a |
| |
1 | 3 | |
2 | ||
| ||
| 1 | |
| 1 | |
Figure 73: Removing the foot mounting rail
ÊLoosen the three screws (1) of the foot mounting rail.
100 | Options Guide | TX300 S6 |
