![](/images/new-backgrounds/1158793/158793153x1.webp)
Expansion cards and BBU | Installing expansion cards |
ÊOpen the server as described in the chapter "Preparation" on page 27.
Figure 49: Removing the slot cover
ÊOpen the slot locking bar in the direction of the arrow (1).
ÊRemove the slot locking bar.
ÊRemove the slot cover (2).
V CAUTION!
Keep the slot cover for further use. If the expansion card is removed again and not replaced with a new one, the slot cover has to be reinstalled to comply with applicable EMC regulations and satisfy cooling requirements and fire protection measures.
ÊUnpack the new expansion card, and make the desired settings. You should read the accompanying documentation supplied with the expansion card beforehand.
TX300 S6 | Options Guide | 77 |