2 Procedure
VCAUTION!
●The actions described in this manual shall be performed by technical specialists. A technical specialist is a person who is trained to install the server including hardware and software.
●Repairs to the device that do not relate to CSS failures shall be performed by service personnel. Please note that unauthorized interference with the system will void the warranty and exempt the manufacturer from all liability.
●Any failure to observe the guidelines in this manual, and any improper repairs could expose the user to risks (electric shock, energy hazards, fire hazards) or damage the equipment.
ÊFirst of all, carefully read the safety instructions in the chapter "Safety instructions" on page 19.
ÊMake sure that all necessary manuals (see the section "Documentation overview" on page 12) are available; print the PDF files if required. Most importantly, you will need the Operating Manual for the server and the Technical Manual for the system board.
ÊShut the server down correctly, switch it off, disconnect the power cords and open the server as described in the chapter chapter "Preparation" on page 27.
ÊCarry out the expansion or upgrade of your server as described in the pertinent chapter.
I Installation and removal of the
ÊClose the server, connect it to the power outlet, and switch it on as described in the chapter chapter "Completion" on page 105.
ÊStart the operating system and make the appropriate configuration if necessary (see the Operating Manual).
I For the latest information on optional products provided for the TX300 S6 see the configurator of this server:
https://sp.ts.fujitsu.com/dmsp/docs/cnfgtx300s6.pdf
TX300 S6 | Options Guide | 17 |
