6 Processors
V CAUTION!
●Before installing/removing processors to/from the server, turn off the server, all peripheral devices, and any other connected devices. Also unplug all power cords from the power outlet. Failure to do so can cause electric shock.
●Do not touch the circuitry on boards and soldered parts. Hold the metallic areas or the edge of the circuit boards.
●When adding a processor, be sure to add memory into "DIMM 1D" additionally. Refer to chapter "Main memory" on page 37 for the installation of the memory.
●When installing the processor, be careful not to bend the pins of the processor socket.
●Follow the safety instructions in the chapter "Safety instructions" on page 19.
V CAUTION!
Processors are modules which can react extremely sensitively to electrostatic discharges and which must therefore always be handled with care. After a processor has been removed from its protective sleeve or from its socket, place it with its smooth side down on a non- conducting, antistatic surface. Never push a processor over a surface.
TX300 S6 | Options Guide | 41 |
