![](/images/new-backgrounds/1158793/158793221x1.webp)
Completion | Rack model |
11.3Rack model
11.3.1 Attaching the rack front cover
Reattach the rack front cover after implementing the following routines:
–Installing/removing accessible drives
–Conversion from a floorstand model to a rack model
2 |
1 |
2 |
Figure 85: Attaching the rack front cover
ÊAttach the rack front cover, together with the plastic front cover, from the front
(1).
V CAUTION!
The rack front cover brackets are marked "Left" and "Right". Position the bracket marked "Left" on the left of the rack front.
ÊAttach the rack front cover using two M3 x 6 mm screws on each side (2).
TX300 S6 | Options Guide | 111 |