Fujitsu TX300 manual Preparation

4 Preparation

V CAUTION!

●Before removing or attaching covers, turn off the server, all peripheral devices, and any other connected devices. Also unplug all power cords from the power outlet. Failure to do so can cause electric shock.

●Only for rack model:

Use the anti-tilt plate to prevent the rack from tipping when installing the rack. Pulling the server out of the rack without having installed the anti-tilt plate may cause the rack to tip over.

●Only for rack model:

Be careful not to pinch fingers or clothes when sliding out the server or pushing it back. Failure to do so may cause injury.

●Before attaching the cover, make sure no unnecessary parts or tools are left inside the server.

●Before turning on the server, make sure the cover is closed.

●Follow the safety instructions in the chapter "Safety instructions" on page 19.

TX300 S6 Options Guide 27