Accessible drives and LSD/LSP | Multibay 1 |
Figure 41: Connecting the I2C cable to the LSP/LSD
ÊRemove the cable tie of the I2C cable near the CON.4 connector.
ÊConnect the I2C cable CON.4 connector to the LSP/LSD (see the cabling plans in the Appendix).
ÊAttach the front cover or the rack front cover as described in the section "Attaching the front cover" on page 108 or in the section "Attaching the rack front cover" on page 111.
ÊClose the server, connect it to the power outlet, and switch it on as described in the chapter "Completion" on page 105.
TX300 S6 | Options Guide | 67 |
