Further options

TPM

￿

￿

￿

Figure 67: Securing the TPM

ÊInsert the TPM on the system board (1).

ÊFasten the TPM with the special screw for the TPM (2).

Please use the TPM screwdriver insert bit to tighten the special screw.

I Do not fasten the screw too tightly (torque value of 0.6 Nm).

ÊReinstall the hot-plug power supply unit in its slot (description see the Operating Manual).

ÊClose the server, connect it to the power outlet, and switch it on as described in the chapter "Completion" on page 105.

I You can find information on configuring the TPM in the "D2619-N BIOS Setup Utility for PRIMERGY RX300 S6 and TX300 S6" manual.

TX300 S6

Options Guide

95

Page 95
Image 95
Fujitsu TX300 manual Further options, Securing the TPM