GE ML1200 STP, Rstp settings, Port/Tag Vlan settings, IP-Access and Host Table settings

CHAPTER 5: IP ADDRESSING IP ADDRESSING

Here is a list of the modules and related settings that can be selected not to default back to factory default settings.

Name	Areas affected
System	IP Configuration, Boot mode
User	Users settings (e.g. login names, passwords)
Port	Port settings, Broadcast Protection and QoS
	settings
STP/RSTP	STP, RSTP settings
Port-Security	Port Security settings
Port-Mirror	Port Mirror settings
VLAN	Port/Tag VLAN settings
ACCESS	IP-Access and Host Table settings
IGMP	IGMP Settings
LACP	LACP settings

Kill Config option using CLI

This command is a “hidden command”; that is, the on-line help and other help functions normally do not display this command. The syntax for this command is:

kill Config

or

kill config save=module command

The kill Config command will default all the Switch settings back to factory defaults, while the kill config save=module will default all with the exception of module selected.

Available modules are: system, user, acces, port, vlan, ps, mirror, lacp, slp, and igmp.

MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 5–29