GE instruction manual Example 12-4 Configuring STP parameters, ML1200stp##show stp ports

SPANNING TREE PROTOCOL (STP) CHAPTER 12: SPANNING TREE PROTOCOL (STP)

Example 12-4: Configuring STP parameters

ML1200(stp)##show stp config

STP CONFIGURATION
-----------------
Spanning Tree Enabled(Global) :		NO
Spanning Tree Enabled(Ports)	:	YES, 1,2,3,4,5,6,7
Protocol	:	Normal STP
Bridge ID	:	80:00:00:20:06:2b:e1:54
Bridge Priority	:	32768
Bridge Forward Delay	:	15
Bridge Hello Time	:	2
Bridge Max Age	:	20
Root Port	:	0
Root Path Cost	:	0
Designated Root	:	80:00:00:20:06:2b:e1:54
Designated Root Priority	:	32768
Root Bridge Forward Delay	:	15
Root Bridge Hello Time	:	2
Root Bridge Max Age	:	20
ML1200(stp)##show stp ports
STP Port Configuration

-------------------------------------------------------------------------------

Port# Type Priority Path Cost State Des. BridgeDes. Port

-------------------------------------------------------------------------------

01 TP(10/100) 128 100 Disabled 80:00:00:20:06:2b:e1:54 80:01

12–8 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL