GE ML1200 EnerVista Secure Web Management, Example shown in the previous section, the URL is

CHAPTER 1: INTRODUCTION INTRODUCTION

1.5EnerVista Secure Web Management

1.5.1Logging in for the First Time

Enter the following URL in the web browser to login to the EnerVista Secure Web

Management software.

https://<IP Address assigned to the switch>

Make sure you use HTTPS (secure HTTP) and not HTTP in the URL.

In the example shown in the previous section, the URL is:

https://3.94.247.41

If your site uses name services, you can use a name instead of the IP address. Please make sure that the name is resolved to the IP address assigned to the switch.

The secure site will issue the certificate check shown below.

FIGURE 1–2: Security certificate

Once you click Yes on the security certificate, the browser will prompt you to login.

MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 1–15