GE instruction manual ML1200stp##port port=1 status=enable

CHAPTER 12: SPANNING TREE PROTOCOL (STP) SPANNING TREE PROTOCOL (STP)

Configuring STP parameters (continued)

ML1200(stp)##port port=1 status=enable

Successfully set the STP status for port 1

R-2S(stp)##show stp ports

STP Port Configuration

-------------------------------------------------------------------------------

Port#	Type	Priority Path Cost		State	Des. Bridge	Des. Port
-------------------------------------------------------------------------------
01	TP(10/100)	128	100	Forwarding	80:00:00:20:06:2b:e1:54		80:01
02	TP(10/100)	20	20	Forwarding	80:00:00:20:06:2b:e1:54		80:02
03	100MB Fiber	128	100	Disabled	80:00:00:20:06:2b:e1:54		80:03
04	100MB Fiber	128	100	Disabled	80:00:00:20:06:2b:e1:54		80:04
05	100MB Fiber	128	100	Disabled	80:00:00:20:06:2b:e1:54		80:05
06	100MB Fiber	128	100	Disabled	80:00:00:20:06:2b:e1:54		80:06
07	TP(10/100)	128	100	Disabled	80:00:00:20:06:2b:e1:54		80:07
ML1200(stp)##show stp config
						The age parameter is out of range as
STP CONFIGURATION						per the IEEE 802.1d specifications.
-----------------
Spanning Tree Enabled(Global) :				YES
Spanning Tree Enabled(Ports) :				YES, 1,2,3,4,5,6,7
Protocol			:	Normal STP
Bridge ID			:	80:00:00:20:06:2b:e1:54
Bridge Priority			:	15535
Bridge Forward Delay			:	15
Bridge Hello Time			:	2
Bridge Max Age			:	20
Root Port			:	0
Root Path Cost			:	0
Designated Root			:	80:00:00:20:06:2b:e1:54
Designated Root Priority			:	15535
Root Bridge Forward Delay			:	15
Root Bridge Hello Time			:	2
Root Bridge Max Age			:	20

MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 12–11