GE ML1200 Device commands are shown below, Vlan Registration over Garp for details

CHAPTER 17: MISCELLANEOUS COMMANDS MISCELLANEOUS COMMANDS

•portaccess

•reauth

•setport

•show-port

•show-stats

•trigger-reauth

The device commands are shown below.

•device

•backpressure

•broadcast-protect: enables or disables broadcast storm protection globally

•flowcontrol

•rate-threshold: sets the broadcast rate threshold (frames/sec)

•setage: sets the mgtagetime

•setport: sets the port configuration

The VLAN registration over GARP (GVRP) commands are shown below. Refer to Chapter 11 -

VLAN Registration over GARP for details.

•gvrp

•help gvrp: configures GVRP parameters for dynamic VLAN

•set-forbid: sets forbidden ports for a tag-based VLAN

•show-ports: show ports current GVRP state

•show-forbid: show forbidden ports for tag-based VLAN

•set-ports: set GVRP port state usage

•show-vlan: shows dynamic/static tag-based VLANs

•static: convert dynamic VLAN to static VLAN

The IGMP commands are shown below. Refer to Chapter 15 - IGMP for additional details.

•mcast

•set-leave: enables or disables IGMP immediate leave status

•set-port: sets the port mode

•set-qi: sets the query interval (60 to 127) for router ports

•set-qri

•set-querier: enables or disables switch as querier

•show-group: displays IGMP group list

•show-port: displays IGMP port mode

•show-router: displays IGMP router list

The Link Aggregation Control Protocol (LACP) commands are shown below.

•lacp

•add port

•del port

•edit port

MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 17–17