GE ML1200 instruction manual System

IP ADDRESSING CHAPTER 5: IP ADDRESSING

[SYSTEM]

***Edit below this line only***

system_name=ML1200

system_contact=support@gemultilin.com system_location= Markham, Ontario boot_mode=manual system_ip=192.168.5.5 system_subnet=0.0.0.0 system_gateway=0.0.0.0 idle_timeout=10 telnet_access=enable snmp_access=enable

web_access=enable

***Edit above this line only***

##########################################################

# User Accounts - This area configures user accounts for #

# accessing this system. #

##########################################################

...

FIGURE 5–1: Contents of a config file

1.A config file allows only certain portions of the file to be edited by a user. Changing any other part of the file will result in the system not allowing the file to be loaded, as the CRC computed and stored in the file would not be matched. Should you want to edit, edit the System portion of the file only. GE Multilin, Inc. recommends editing the “script” file (see below)

2.File names cannot have special characters such as *#!@$^&* space and control characters.

5–16 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL