GE instruction manual Back pressure and flow control, ML1200device## show port=11

PORT MIRRORING AND SETUP CHAPTER 9: PORT MIRRORING AND SETUP

Back pressure and flow control (continued)

ML1200(device)## backpressure rxthreshold=30

Rx Buffer Threshold set successfully

ML1200(device)## show backpressure

Rx Buffer			Threshold :	30
ML1200(device)## show port
Keys:	E	=	Enable		D	= Disable
	H	=	Half Duplex		F	=	Full Duplex
	M	=	Multiple VLAN's		NA =		Not Applicable
	LI	=	Listening		LE =		Learning
	F	=	Forwarding		B	=	Blocking
Port	Name		Control	Dplx	Media		Link Speed Part Auto VlanID GVRP STP

-------------------------------------------------------------------------------

1	B1	E	H	10Tx	UP	10	No	E	1	-	-
2	B2	E	H	10Tx	DOWN	10	No	E	1	-	-
3	JohnDoe	E	H	10Tx	DOWN	10	No	E	1	-	-
4	JaneDoe	E	H	10Tx	DOWN	10	No	E	1	-	-
5	B5	E	F	100Tx	UP	100	No	E	1	-	-
6	B6	E	H	10Tx	DOWN	10	No	E	1	-	-

ML1200(device)## show port=11

Configuration details of port 11

--------------------------------------------------

Port Name	: JohnDoe
Port Link State	: DOWN
Port Type	: TP Port
Port Admin State	: Enable
Port VLAN ID	: 1
Port Speed	: 10Mbps
Port Duplex Mode	: half-duplex
Port Auto-negotiation State	: Enable
Port STP State	: NO STP
Port GVRP State	: No GVRP
Port Priority Type	: None
Port Security	: Enable
Port Flow Control	: Disable
Port Back Pressure	: Disable
Port Link Loss Alert	: Enabled

ML1200(device)## setport port=11 flow=enable bp=enable

(continued on next page)

9–6 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL