Hansol Multitech Uromat 3000 installation instructions Adjustment, Tube Unit Support Arm

3.Adjustment

Caution: If changes are made to the movement paths, the software must afterward be corrected.

3.1Tube Unit Support Arm

Check the tube unit support arm (Fig. 51/Pos. 1) with the spirit level (Pos. 2) and loosen the nuts (Fig. 51a/Pos. 5) and the mounting screws (Fig. 51b/Pos. 6). Correct any differences with the screws (Pos. 8). Retighten the mounting screws and nuts.

Fig.51

Fig.51a

Fig.51b						Fig.52
06/00						- 49 of 90 -
Rev. 00	©	2000	Hans	Pausch	Röntgengerätebau	Graf -Zeppelin-Str. 1	D-91056

0116 7201

Erlangen ALL RIGHTS RESERVED Ru