Honeywell HRHD 410 Digital Zoom Playback Mode

Operation
	Table 4-1	Playback Controls (cont’d)
Press this button …	To do this …
ENTER/PAUSE	Pause the video on the screen. The screen displays
Camera Buttons 1 to 4	Display that camera at full screen.
QUAD/SEQ	Change the display format from full screen to quad (2x2) mode.
	Note Changing the display format from quad (2x2) to full screen is
		not available.
	Note When playing recorded video at maximum speed with very
		high image quality, playback of recorded audio may be
		occasionally interrupted.
Shuttle Ring	The Shuttle Ring only functions in Playback mode. Turn the ring
	clockwise to play video forward. Turn the ring counterclockwise to
	play video backward. Playback speed varies with the amount the ring
	is turned. The playback speeds are Wx0.5, WW, WWW, and
	WWWW, Xx0.5, X, XX, XXX, and XXXX.
	When you release the ring, it snaps back to the center position and
	the video pauses.
Jog Dial	The Jog Dial only functions when playback video has been paused.
	Turn the jog dial clockwise to play video forward image-by-image.

Turn the jog dial counterclockwise to play video backward image-by-image.

Note When playing recorded video at maximum speed with very high image quality, playback of recorded audio may be interrupted occasionally.

Note You cannot change the system setup from a remote site during Playback mode.

Digital Zoom Playback Mode

Press the PTZ button while in Playback mode to enter Digital Zoom Playback mode. The image pauses and a bright small box is laid over the image. This box indicates the spot to be enlarged. To enlarge that spot, move the position of the box using the Arrow buttons, and then press  . The enlarged screen displays . Press PTZ again to release the Digital Zoom Playback mode and return to Playback mode.

Note You cannot enter Digital Zoom Playback mode when the selected camera is set up as Cover 1 or Covert 2 and not played back.

Rev 3.03	84	Document 900.0315
		02/07