Operation
Date/Time Search
Figure
1.Move the cursor over the date and then press .
You can use the Arrow buttons or the Jog Dial to adjust the numbers.
2.Move the cursor over the time and then press .
You can use the Arrow buttons or the Jog Dial to adjust the numbers.
3.After you have set the date and time you want to search, highlight OK and then press . The selected date and time displays. (If no video was recorded at the selected time, you will see a blank screen.)
4.You can now use the Arrow buttons, Jog Dial, and Shuttle Ring controls to review the surrounding video.
Calendar Search
Figure
1.Days with recorded video display on the calendar with white numbers. You can
highlight the days with recorded video by using the Arrow buttons. After you have highlighted a day, press to select it.
2.A time bar displays at the bottom of the calendar. Hours in which video was recorded will be highlighted with blue. Highlight the time bar and select the time using the left and right Arrow buttons. Time adjusts in 30 minute increments.
3.After you have set the date and time you want to search, highlight Go and then press . The selected date and time displays.
Rev 3.03 | 86 | Document 900.0315 |
|
| 02/07 |