Configuration

Figure 3-2 Admin Password Screen

2.Enter the password by pressing the appropriate combination of Camera buttons and then ENTER ( ). The factory default password is 4321. There are two Setup screens: Quick Setup and Normal Setup. The factory default is the Quick Setup screen.

Quick Setup Screen

Figure 3-3 Quick Setup Screen

Use the Quick Setup screen to set up the most commonly used features of your DVR. Use the Arrow buttons to move through the options. Pressing  lets you make your selections.

1.Highlight the box beside Quick Setup and then press  to toggle between On and Off. If you select Off, you will use the Normal Setup screen to change the DVR settings.

2.Highlight the Recording Speed/Quality box and select recording speeds from as few as 0.5 ips to as fast as 30 ips (25 for PAL).

3.Highlight the second box beside Recording Speed/Quality and select recording speeds from as few as 0.5 ips to as fast as 30 ips (25 ips for PAL).

4.Highlight the box beside Audio Recording and select either On or Off.

Rev 3.03

21

Document 900.0315

 

 

02/07