Configuration

4.The Transfer Speed indicates the image rate transferred to each RAS. Highlight the box beside Transfer Speed, press  then adjust the number.

Note The maximum transfer speed over a LAN is 30 images per second (25 ips for PAL) when the resolution is set to Standard. However, when set to High the transfer speed will decrease to 15 images per second (12.5 ips for PAL).

Caution Selecting the maximum transfer speed will STOP video recording.

Adjust the transfer speed if you want to continue the recording.

5.You can program the image quality for transferring to RAS. Highlight the box beside Remote Quality and then press  . You can set the image quality to Very High, High, Standard, or Low.

LAN Setup Screen

Use the LAN Setup screen to configure your Local Area Network.

Figure 3-49 LAN Setup Screen

Highlight the box beside Type and then press  .to select from Manual, DHCP, and ADSL (PPPoE).

Selecting Manual from Type allows you to set up LAN parameters manually.

Rev 3.03

61

Document 900.0315

 

 

02/07