Configuration
Note Only the system administrator can upgrade the software.
You cannot upgrade the software during clip copy.
7.You can save your changes by highlighting OK and pressing . Selecting Cancel exits the screen without saving the changes.
Date/Time Setup
Highlight Date/Time in the Main Menu (MENU ➤ System ➤ Date/Time) and then press . The Date/Time setup screen displays.
Figure
Caution If you set a date and time that is older than some of your recorded images, any images with dates and times later than the new setting will be deleted.
1.Highlight the first box beside Date/Time and then press . The individual sections of the date highlight.
Use the Up and Down Arrow buttons or the Jog Dial to change the number. Use the Left and Right Arrow buttons to move between month, day and year.
After you have the correct date, press .
2.Highlight the second box beside Date/Time and press . The individual sections of the time will highlight.
Use the Up and Down Arrow buttons or the Jog Dial to change the number.
Use the Left and Right Arrow buttons to move between hour, minutes and seconds.
After you have the correct time, press .
Rev 3.03 | 26 | Document 900.0315 |
|
| 02/07 |