Configuration

4.Highlight the File Name box and then press  . A virtual keyboard displays (see Figure 3-7). Enter a file name for the video you are copying and select Close. The DVR automatically adds the camera number (for example, 01) and .exe to the file name. If you want to save the file in a specific folder, enter the folder name followed by a / (for example, folder/filename).

5.After you have given the video a file name, highlight the Start button and then press  . The DVR displays the drive capacity, the backup file size, and asks if you want to continue.

When the selected drive has more than two partitions, the following Disk Partition Selection screen displays. If the file system is not FAT32, the Type displays Not Supported.

Figure 3-60 Disk Partition Selection Screen

After you select the drive and partition to use for clip copy, the DVR displays the drive capacity, the clip size, and asks if you want to continue.

Note We recommend that you do not copy files larger than 2 GB.

You can use other functions on the DVR while video is being backed up. To do this, highlight Close and then press  . You can return to the Clip Copy screen at any time to check the progress.

Note You can not end the clip copy process during CD burning.

Refer to the Remote Administration System (RAS) User Guide for instructions on how to review the images you have copied.

Rev 3.03

73

Document 900.0315

 

 

02/07