Configuration

Note Entering the ID and Password and highlighting OK reads the current IP Address of the DVR configured by the ADSL network.

Note If the DVR is configured for DHCP or an ADSL network, the IP Address of the DVR might change whenever the unit is turned on.

Modem Setup

Use the Modem Setup screen to configure your modem.

Figure 3-53 Modem Setup Screen

The Use field displays the available modem type: External Modem.

1.Highlight the box beside Baud Rate of the RS232 field and then press  . A list of baud rates ranging from 300 to 115,200 displays.

2.Highlight the box beside Data Bit of the RS232 field. Press  to toggle between 7 bit and 8 bit formats.

3.Highlight the box beside Stop Bit of the RS232 field. Press  to toggle between 1 and 2 Stop Bits.

4.Highlight the box beside Parity of the RS232 field and then press  . A drop-down list displays. You can select from None, Odd, or Even parity.

5.To save your changes, highlight OK and then press  . Select Cancel to exit the screen without saving the changes.

Rev 3.03

65

Document 900.0315

 

 

02/07