Installation

Connecting to the USB Port

Figure 2-14 USB Connector

USB

Use the USB port to connect external hard disk drives, CD-RW drives, or flash drives for archiving video.

1.Position the external hard disk drive close enough to the DVR so that you can make the cable connections, usually less than 6 feet (1.83 m).

2.Use the USB cable provided with the hard disk drive or CD-RW to connect it to the DVR.

See Chapter 4, Operation for archiving video to an external USB-IDE hard disk drive, USB CD-RW drive or USB flash drive.

You can also upgrade the software through the USB port.

Connecting the Power Cord

Figure 2-15 Power Cord Connector

100-240 V ~ 50/60 Hz, 2 A

Connect the power cord of the adapter to the DVR and the other end to the wall outlet.

Rev 3.03

14

Document 900.0315

 

 

02/07