Configuration

Load / Save Setup

You can load saved DVR settings or save the current DVR settings. To load the saved settings:

1.Connect the USB device containing the setup file (.cfg) to the DVR.

2.Highlight Load — File Name and press  . The Load Setup screen displays setup file names that are available.

3.Select the desired setup file and press OK. The selected file name is displayed in the File Name field.

4.Select Load to load the selected saved settings and change the DVR settings accordingly.

Note Even after changing the DVR settings by loading saved settings, the time-related settings (Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.

Note If you want to change the network settings, check Include network setup. Otherwise, the network settings will NOT be changed.

To save the current settings:

1.Connect the USB device to the DVR.

2.Highlight Save — File Name and press  . A virtual keyboard allows you to enter the file name.

3.Selecting Save will save the current DVR settings in .cfg file format on the USB device.

Figure 3-61 Load / Save Setup Screen

Rev 3.03

75

Document 900.0315

 

 

02/07