Installation

Connecting the Monitor

Connecting the Spot Monitor

Figure 2-6 Video Out Connectors

VIDEO OUT

SVHS OUT

Connect the Spot Monitor to either the Video Out or SVHS Out connector.

Note For Spot Monitor output, set the CVBS (SVHS) VGA selector to CVBS (SVHS) (see Figure 2-5). If your monitor has an SVHS input, use it to give you better quality video display.

Note The Video Out (BNC) and the SVHS Out connectors may be connected to individual monitors for simultaneous operation.

Connecting the RGB Monitor

Figure 2-7 VGA Connector

VGA

Use the VGA port for RGB Monitor output. Connect the RGB Monitor to the VGA connector. Connect an RGB cable with a DB15 (Male) connector which is usually less than 10 feet (3 m) to the DVR connector.

Rev 3.03

9

Document 900.0315

 

 

02/07