Configuration
LAN Setup — ManualNote Obtain the appropriate IP Address, Gateway and Subnet Mask from your network administrator.
Change the numbers by highlighting them and using the Up and Down Arrow buttons or the Jog Dial to increase or decrease the numbers.
The factory default LAN settings are:
IP Address | 192.168.1.129 |
Gateway | 192.168.1.254 |
Subnet Mask | 255.255.255.0 |
1.Highlight the box beside DNS Server and then press .to enter the IP address of the DNS server. If you set the DNS Server, the domain name of the DVRNS server instead of the IP address can be used during the DVRNS Server setup. See DVRNS (DVR Name Service) Setup Screen, page 66 for detailed information on DVRNS Server setup.
2.Highlight Port Number Setup … and then press to display the Port Number Setup screen.
Figure
Note Obtain the appropriate Port Number for each RAS related program (Admin, Watch, Search, and Callback) from your network administrator.
To change the number, highlight it and use the Up and Down arrow buttons to increase or decrease the number.
Rev 3.03 | 62 | Document 900.0315 |
|
| 02/07 |