Configuration

Figure 3-22 Motion Detection Zone Screen

The Motion Detection Zone screen is laid over the video for the selected camera. You can set up motion detection zones by selecting or clearing blocks.

Note You can activate or deactivate four cells at a time using the  button. After four cells are highlighted, if you hold the  button down until the color of the highlighted cell changes from blue to yellow, you can select individual cells by using the camera buttons.

Press Menu on the front panel to open the Motion Detection Zone menu. The menu choices are described as follows:

Table 3-2

Motion Detection Zone Choices

Menu choice

Description

 

 

Exit with save

Closes the menu after saving the changes.

 

 

Exit without save

Closes the menu without saving the changes.

 

 

Select All Blocks

Activates all blocks to detect motion.

 

 

Clear All Blocks

Deactivates all blocks so that they will not detect motion.

 

 

Text In Setup Screen

Use the Text-In Setup screen to set the DVR to display the text-in information. Highlight Text-Inin the Device menu (MENU ➤ Device ➤ Text-In) and then press  . The Text-In setup screen displays.

Rev 3.03

37

Document 900.0315

 

 

02/07