Configuration

Figure 3-11 Time Sync Screen

Highlight the box beside Automatic Time Sync and then press  to toggle between On and Off.

Highlight the box beside SNTP Server and then press  . Change the numbers by highlighting them and using the Up and Down arrows to increase or decrease the number value.

Highlight the box beside Interval and then press  . Set the time interval for synchronization from 30 to 300 minutes.

The box beside System Clock displays the DVR time setting.

The box beside Server Clock displays the time setting of the time server. Highlighting the Update button and then pressing  updates the server clock.

Note The Server Clock displays "–" when the DVR cannot load the time information from the time server.

The box beside Next Synchronization displays the time when the next synchronization is scheduled. If you want to synchronize the time instantly, highlight the Now… button and then press  .

Caution When selecting Now…, any video with a later time and date will be lost if the time and date of a time server is earlier than the last recorded image of the DVR.

Rev 3.03

28

Document 900.0315

 

 

02/07