Configuration

Many of the buttons have multiple functions. Table 3-1describes each button and control. Take a few minutes to review the descriptions. You will use these to initially set up your DVR and for daily operations.

Note There is no separate Alarm button. Pressing any key on the front panel resets alarm output, including the internal buzzer when the alarm is activated. However, when you are in the menu or PTZ mode, you must exit the menu or PTZ mode first to reset the alarm output.

 

Table 3-1

Front Panel LEDs and Controls

Front panel

Function

 

 

 

 

LEDs

 

 

 

 

POWER

The POWER LED is lit when the DVR is On.

 

 

ALARM

The ALARM LED is lit when alarm output or internal buzzer is activated.

 

 

REC

The REC LED is lit when the DVR is recording. When the DVR is in Panic recording

 

mode, the REC LED flickers.

 

 

NETWORK

The NETWORK LED is lit when the unit is networked, either via Ethernet or modem.

 

 

COPY

The COPY LED is lit when data is being copied using the internal CD-RW or the

 

USB port.

 

 

 

BUTTONS

Press the button to …

 

 

Camera

• Cause the selected camera to display full screen.

buttons (1-4)

• Enter passwords.

 

 

• Function in PTZ mode:

Press CAMERA 1 to zoom in in PTZ mode.

Press CAMERA 2 to zoom out in PTZ mode.

Press CAMERA 3 to control near focus of the PTZ camera in PTZ mode.

Press CAMERA 4 to control far focus of the PTZ camera in PTZ mode.

MENU

 

 

•

Enter the Main Menu. You must enter the administrator password to access

 

 

 

 

 

 

 

 

the Main Menu. Pressing MENU also closes the current menu or setup dialog

 

 

 

 

 

 

 

 

box.

 

 

 

 

 

 

 

•

Displays the Search menu in Playback mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•Loads the PTZ menu in PTZ mode.

QUAD/SEQ

•

Toggle between quad (2x2) display mode and sequence mode.

 

•

Loads a Preset view in the PTZ mode.

Rev 3.03

18

Document 900.0315

 

 

02/07