Configuration

Note For the Notify action to work, the DVR should be registered in the

RAS (Remote Administration System).

Video Loss Event Action (Record) Setup Screen

Use this screen to set the DVR to react to video loss from a camera differently. Each camera can be assigned a schedule, associated camera, recording speed, video quality and dwell time.

Figure 3-43 Video Loss Event Action (Record) Screen

1.Highlight the Sched box and then press  . A schedule screen displays. Set the schedule as described earlier.

2.Highlight the Camera box and then press  . A camera selection screen displays. Select the camera number you would like to associate with the camera that has lost video.

Note You can associate multiple cameras with a camera that has detected a loss of video.

3.Highlight the Speed box and select number of images per second you would like to record from the drop-down list.

4.Highlight the Quality box and select the image quality you want to record from the drop-down list.

5.Highlight the Dwell Time box and set the length of time you would like to record for the associated video loss.

Rev 3.03

56

Document 900.0315

 

 

02/07