Configuration
Figure
1.Highlight the field for the settings you wish to make. Select the correct Baud Rate, Parity, Data Bit, and Stop Bit for the device you are connecting to the DVR.
2.For RS232, it is possible to select either Remote Control, External Modem, or
For RS485, it is possible to select either Remote Control or PTZ Control in the Usage field.
Note Selecting External Modem in the RS232 field only defines the RS232C port as being used for external modem connections. See Modem Setup, page 65 for details on setting up an external modem.
Note Selecting PTZ Control in the RS485 field only defines the RS485 port as being used for PTZ camera connections. Select the PTZ device in the Camera Setup screen (see Camera Setup Screen, page 34).
Note If networking is configured by the external modem,
Rev 3.03 | 43 | Document 900.0315 |
|
| 02/07 |