Configuration

4.Highlight the box beside Status and then press  to toggle status display On and Off.

5.Highlight the box beside Left/Right Margin and then press  to adjust the left and right margins. The margins can be set from 1 to 24.

6.Highlight the box beside Top/Bottom Margin and then press  to adjust the top and bottom margins. The margins can be set from 1 to 24.

7.Highlight the box beside Text-Inand then press  to toggle the text-in data display On and Off.

8.If you want to read text input strings displayed on the screen easily and clearly,

turn On Text-In Background color. Highlight the box beside Text-In Background color and then press  to toggle between On and Off.

Main Monitoring Setup Screen

Use the Main Monitoring Setup screen (MENU ➤ Display ➤ Main Monitoring) to adjust the display dwell time for each camera displayed on the main monitor. You can also set the video from the event-detected cameras to be displayed on the main monitor during the preset dwell time.

Figure 3-47 Main Monitoring Setup Screen

1.Highlight the box beside Sequence Dwell Time and then press  . You can adjust the sequence dwell time from 3 to 60 seconds.

Note The DVR does not sequence a camera experiencing video loss.

2. Highlight the box beside Event Monitoring and then press  to toggle between On and Off. When it is On, the video of the lowest camera number among cameras associated with the event-detected sensor will be displayed in full-screen on the main monitor during the preset dwell time.

3.Highlight the box beside Event Monitoring Dwell Time and then press  . You can adjust the event monitoring dwell time from 3 to 60 seconds.

Rev 3.03

59

Document 900.0315

 

 

02/07