Configuration
Configuring Recording Settings
Note When the DVR is recording video, the REC LED on the front
panel is lit and a red dot appears on the monitor.
Your DVR offers a variety of flexible recording modes:
•You can set it up to record all the time or to only record events.
•It can be set up to continue recording after the hard disk drive is full by recording over the oldest video.
•You can set it up to alert you when the hard disk is full and stop recording.
Record Mode Setup Screen
Access the Record Mode Setup screen (MENU ➤ Record ➤ Record Mode). The Record Mode Setup screen displays.
Figure
1.Highlight the box beside Resolution and then press . This toggles between Standard and High.
Rev 3.03 | 44 | Document 900.0315 |
|
| 02/07 |