Installation

Note The Loop BNC connectors are auto terminated. Do not connect a cable to the Loop BNC unless it is connected to another terminated device because it will cause poor quality video.

Connecting Audio

Note It is your responsibility to determine if local laws and regulations permit recording audio.

Figure 2-4 Audio In and Out Connectors

AUDIO IN 1

AUDIO IN 2

AUDIO IN 3

AUDIO IN 4

AUDIO OUT

Your DVR can record audio.

1.Connect the audio source to Audio In.

2.Connect Audio Out to your amplifier.

Note The DVR does not have amplified audio output, so you need a speaker with an amplifier. The audio input must be from an amplified source.

Rev 3.03

7

Document 900.0315

 

 

02/07