Configuration

2.Highlight S.M.A.R.T. Setup... and then press  . The S.M.A.R.T. Setup screen displays.

Note If no hard disk drives are installed in the DVR, the S.M.A.R.T.

Setup… button is disabled.

Figure 3-15 S.M.A.R.T. Setup Screen

Your DVR shows the conditions of hard disk drives when the installed IDE hard disk drives support S.M.A.R.T. Monitoring program.

a.Highlight the box beside Use. Press  to toggle between On and Off.

b.The Last-checkfield shows the date and time information of the last storage check.

c.Highlight the box beside Period and select from Daily, Weekly, or Monthly for the checking period.

Note When you select Weekly or Monthly, the Day of Week or Day of Month fields will be activated under the Period field. Select the check day or check date.

d.Highlight the box beside Check Time and adjust the numbers as desired using the Arrow buttons.

e.Highlight the box beside Temperature Threshold and adjust the numbers as desired using the Arrow buttons.

f.Highlight the box beside Sensor Unit and select from Celsius or Fahrenheit.

g.If you want to check the storage status instantly, highlight Check Now, and then press  .

h.You can save your changes by highlighting OK and then pressing  . Selecting Cancel exits the screen without saving the changes.

Rev 3.03

32

Document 900.0315

 

 

02/07