Configuration

Motion Detector Event Action (Notify) Setup Screen

Use this screen to set the DVR to notify the remote site when certain motion events are activated.

Figure 3-39 Motion Detector Event Action (Notify) Screen

1.Highlight the Sched box and then press  . A schedule screen displays. Set the schedule as described earlier.

2.Highlight the Notify box and then press  . This toggles between On and Off. When it is On, the DVR notifies the remote site when certain events occur based on a defined schedule.

Note For the Notify action to work, the DVR should be registered in the

RAS (Remote Administration System).

Text-In Event Action (Record) Setup Screen

Use this screen to set how the DVR reacts to text input from the text-in device. You can assign the text-in a schedule, associated camera, recording speed, video quality, and dwell time.

Rev 3.03

53

Document 900.0315

 

 

02/07