Configuration

Figure 3-20 Alarm In Screen

You can turn each input On (via Alarm I/O or Camera Alarm) or Off. Each input can be given a title, and the inputs can be set as NO (normally open) or NC (normally closed) independently.

Motion Detector

Your DVR has a built-in video motion detector. Use the Motion Detector screen to turn video motion detection On or Off for each camera and to define the area of the image where you want to detect motion.

Highlight Motion Detector in the Device menu (MENU Device Motion Detector) and then press  . The Motion Detector setup screen displays.

Figure 3-21 Motion Detector Screen

To adjust the DVR sensitivity to motion, highlight the box under the Sensitivity heading. There are five settings from 1 to 5—1 is the least sensitive and 5 is the most sensitive.

You can define the area of the image where you want to detect motion; for example, a doorway. Highlight the icon under the Zone heading, and then press  . The Motion Detection Zone screen displays.

Rev 3.03

36

Document 900.0315

 

 

02/07