Configuration

Figure 3-24 Text-In (Generic Text) Setup Screen

Figure 3-25 Text-In (EPSON-POS) Setup Screen

3.Highlight the box beside Transaction Start and then press  . A virtual keyboard (see Figure 3-7) displays. Enter the transaction start string. Refer to the device manufacturer’s documentation for the text string that the device first sends when a transaction starts.

4.If you want the DVR to react to any character sent from the text input device, turn on Any Character. To do this, highlight Any Character and then press  to toggle between On and Off.

Note If Any Character is turned On, you will not be able to enter any text in the Start String box.

5.Highlight the box beside Transaction End and then press  to display the virtual keyboard. Enter the transaction end string. Refer to the device manufacturer’s documentation for the text string that the device sends when a transaction ends.

6.Highlight the more line(s) box and then press  . Select the number of additional lines of text that you want the DVR to record, between 0 and 10.

7.Highlight the box beside Keyword2 and press  to display the virtual keyboard. Enter the second key word for transaction field detection.

Rev 3.03

39

Document 900.0315

 

 

02/07