Installation

Setting Unit for CVBS (SVHS) or VGA Output

Figure 2-5 CVBS (SVHS) VGA Switch

CVBS VGA

SVHS

Set the switch to CVBS (SVHS) or VGA for monitor output. Select CVBS (SVHS) for a spot monitor or VGA for an RGB monitor.

Make sure you set the CVBS (SVHS) or VGA selector switch before turning on the DVR. You cannot change the setting while the unit is running.

Note The DVR may not support some LCD monitors. Also, some monitors do not support Multi Sync.

Note You cannot use the spot monitor and VGA outputs at the same time.

Rev 3.03

8

Document 900.0315

 

 

02/07