Configuration
Figure 3-23 Text-In Setup Screen
Note If networking is configured by the external modem, the text-in cannot be set up. Set the DVR for LAN connections and set up text-in for the RS232C port.
Note Text-in data will not be recorded during clip copy.
1.To set the DVR to display the text-in information, highlight the box beside Use Text-Inand press to toggle between On and Off.
2.Highlight the box under the Product Type heading and then press . Select your device from the list.
Note Generic Text and EPSON-POS devices are currently supported.
Note The following description is for Generic Text and EPSON-POS devices. The screen changes for different types of text input devices and there will be different parameter boxes for you to enter information.
Rev 3.03 | 38 | Document 900.0315 |
| | 02/07 |