Configuration
To give each alarm output its own title, highlight the box under the Title heading and then press . A virtual keyboard displays (see Figure
Highlight the Sched field and press to open a schedule screen. You can schedule alarm output in
Figure
You can select individual blocks of time, entire days of the week, entire blocks of time, or the entire schedule.
•Select a specific block of time by highlighting it and then pressing .
•Select an entire day by highlighting the day of the week or Holiday on the left of the screen and then press .
•Select an entire block of time by highlighting the time period at the top of the screen and then press .
•Select the entire screen by highlighting the empty box in the upper left corner of the screen. Press to toggle between No Arming (no block) to On (blue block) to Event (yellow block).
On means the Alarm Out is active during the scheduled time.
Event indicates the Alarm Out is only active when there is an Event during the scheduled time.
Audio Setup Screen
Use the Audio Setup screen to set the DVR to record audio when it is recording video. Highlight Audio in the Device menu (MENU ➤ Device ➤ Audio) and then press . The Audio Setup screen displays.
Rev 3.03 | 41 | Document 900.0315 |
|
| 02/07 |