Configuration
Figure
1.Highlight the Sched box and then press . A schedule screen displays. Set the schedule as described earlier.
2.Highlight the Notify box and then press . This toggles between On and Off.
When it is On, the DVR notifies the remote site when certain events occur based on a defined schedule.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Motion Detector Event Action (Record) Setup Screen
Use this screen to set the DVR to react to motion detection differently than other events. You can assign each camera a schedule, associated camera, recording speed, video quality, and dwell time.
Figure
Rev 3.03 | 51 | Document 900.0315 |
|
| 02/07 |