Installation
Note For RGB Monitor output, set the CVBS (SVHS) VGA selector switch to VGA (see Figure
Figure
NETWORK
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a CAT5 cable with an RJ45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring, searching, configuration, and software upgrades. See Chapter 3, Configuration for configuring the Ethernet connections.
Connecting to the RS232C PortFigure
RS - 232C
Use the RS232C port to connect an external modem for remote monitoring, configuration, and software upgrades, text input, and to connect a remote control keyboard. Use a modem cable with a DV9S (female) connector to connect to the DVR.
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a CAT5 cable with an RJ45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring, searching, configuration, and software upgrades. See Chapter 3, Configuration for configuring the Ethernet connections.
Rev 3.03 | 10 | Document 900.0315 |
|
| 02/07 |