Configuration

6.The box beside H/W Version and S/W Version displays current hardware and software versions of the DVR.

Note You can upgrade the software only in the System Information

Change screen.

Only the System Administrator can upgrade the software.

You cannot upgrade the software during clip copy.

To upgrade the software:

a.Connect the USB device containing the upgrade package file to the DVR. Highlight Upgrade… and press  . The System Upgrade screen displays showing the upgrade package file name.

Note If no hard disk drives are installed in the DVR, the Upgrade… button will be disabled.

Note If the file system on the USB -IDE hard disk drive or USB flash drive is not FAT16 or FAT32 format, format the device using FAT16 or FAT32 format.

Figure 3-8 System Upgrade Screen

b.Select Start and then enter the Admin password to start the upgrade.

c.The system restarts automatically after the upgrade is complete. The software starts running after restarting the unit.

Rev 3.03

25

Document 900.0315

 

 

02/07