wired network setup
11If the printer description is correct, select Yes, install this printer and click Next.
Note: If more than one printer is found on the network, the Printers Found screen appears. Select the device to configure and install, and then click Next.
Printers Found
Select the printer to configure and install.
Name | IP Address | Mac Address |
To find a printer that is not listed, click ‘Find Another | Find Another Printer | |
Printer.’ | ||
|
printers found screen
Note: If a printer was not found, the Printer Not Found screen appears. Follow the steps on the subsequent screens. If the device is still not found, see troubleshooting information on page 205 for more information.
12Verify that the printer description for your HP PSC is correct using the network configuration page.
13Select the printer description and then click Next.
Setup checks to see if the device selected supports wireless settings.
If the device has wireless capabilities (HP PSC 2500 Series) but is in wired mode
Connection Type
Select how your printer will be connecting to your machine or network.
How will the printer be connected after it is setup?
Wireless | Connect using wireless communications. |
Wired network | Connect using a network cable. |
setup network wired
connection type screen
14Select Wired network, and then click Next.
Setup checks to see if the HP PSC is configured. (If this is a new installation, the device will not be configured.)
The HP PSC is dynamically assigned an IP address and the device settings are shown on the Confirm Settings screen.
reference guide | 139 |