HP 2510xi manual 185

fax setup

	IN	OUT
Telephone
wall jack
Back view of the HP PSC	Answering	Telephone
	machine	(optional)

Use the phone cord supplied in the box with your HP PSC

1Remove the white plug from the port labeled “2-EXT” on the back of your

HP PSC.

2Unplug your answering machine from the telephone wall jack, and connect it to the port labeled “2-EXT” on the back of your HP PSC.

Caution! If you do not connect your answering machine directly to your HP PSC, fax tones from a sending fax machine could be recorded on your answering machine, and you probably will not be able to receive faxes with your HP PSC.

3Set your answering machine to answer after 4 or fewer rings.

4Change the Rings to Answer setting on your HP PSC to 6 rings.

For information on how to change this setting, see set number of rings before answering on page 61.

5Using the phone cord supplied in the box with your HP PSC, connect one end to your telephone wall jack, then connect the other end to the port labeled “1-LINE” on the back of your HP PSC.

Caution! If you do not use the supplied cord to connect from the telephone wall jack to your HP PSC, you probably will not be able to fax successfully. This special 2-wire cord is different from the more common 4-wire phone cords you might already have in your office. For more information about how to tell the difference between the cords, see I have difficulties when sending faxes and when receiving faxes on page 220.

6(Optional) If your answering machine does not have a built-in phone, for convenience you might want to connect a phone to the back of your answering machine at the “out” port.

how your hp psc will answer fax calls

You set the HP PSC to answer after 6 rings, and you set your answering machine to answer after 4 or fewer rings. This ensures that your answering machine will always answer before the HP PSC.

fax setup

reference guide 185