HP 2510xi manual Enable fax confirmation, Send a basic fax

fax

chapter 6

enable fax confirmation

By default, your HP PSC prints a report only if there is a problem with sending or receiving a fax. A confirmation message indicating whether an item was successfully sent appears briefly on the color graphics display after each transaction. If you need printed confirmation that your faxes are successfully sent, follow these instructions before sending any faxes.

1Press Setup.

2Press 1, then press 5.

This selects Print Report and then selects Fax Report Setup.

Print Report

1.Last Transaction

2.Fax Log

3.Speed Dial List

4.Self-Test Report

5.Fax Report Setup

3Press 5, then press OK. This selects Send Only.

Fax Report Setup

1.Every Error

2.Send Error

3.Receive Error

4.Every Fax

5.Send Only

6.Off

Note: You will still receive printed reports for any errors that occur during faxing if you select the Send Only report.

For more information on printing reports, see print reports on page 64.

send a basic fax

This section describes how to send a basic black-and-white fax.

If you are interested in sending a multiple-page fax, see send a two-page black- and-white fax on page 59. You can also send a color or photo fax. For more information, see send a color original or photo fax on page 59.

1Load the first page face down on the right front corner of the glass. For more information, see load an original on page 11.

2Press Fax.

The Enter Fax Number screen appears.

3Enter the fax number.

4Press Start Black.

Pressing Start Black scans the first page to memory. After the page has been scanned, the front panel prompts you to scan another page.

5Press 1 (Yes) to fax another page or 2 (No) if you do not have another page to fax.

58 hp psc 2500 series