use the network configuration tools

You can use the HP PSC’s internal Web page to:

•Check printer (HP PSC) status

•View network statistics

•Adjust the network configuration

•Scan pages over the network

•Link to HP's website for support and to purchase supplies

Caution! Use caution when changing the print server's wireless network settings; you might lose your connection. If you lose your connection, you might need to use the new settings to reconnect. If the print server loses its network connection, you might need to reset it to factory-default and reinstall the software.

Note: Do not disable TCP/IP (Transmission Control Protocol/Internet Protocol) on your computer. It is required for communication with the embedded Web server.

adding security to the network

As with other networks, security for wireless LANs (WLANs) focuses on access control and privacy. Traditional WLAN security includes the use of Service Set Identifiers (SSIDs), open or shared-key authentication, static WEP keys, and optional Media Access Control (MAC) authentication. This combination offers a rudimentary level of access control and privacy.

Advanced forms of authentication and encryption might also be employed on the WLAN. These include WPA/802.1x, which incorporates Temporal Key Integrity Protocol (TKIP) security and EAP/802.1x authentication, and WPA/PSK. All of the afore-mentioned terms are discussed in wireless network settings on page 79, and in the Reference Guide for your HP PSC.

Note: To protect your wireless network, HP strongly suggests you implement a wireless security scheme (either WEP or WPA) during setup, use an antivirus program to protect against computer viruses, and follow basic security rules such as setting strong passwords and not opening unknown attachments. Other network components, including firewalls, intrusion- detection systems, and segmented networks, should also be considered as part of your network design.

to add security to your network after the device is installed

Note: If you decide to add encryption and authentication to your network after installing the HP PSC, change the settings on your HP PSC prior to changing them on other nodes on your network.

1Print a network configuration page.

2Enter either the URL or device IP address into the Address field on your browser.

The EWS Home page appears, showing the hp psc 2500 series Device Info.

3From the Home page navigation menu, click Select Language.

4Select a language for the Web interface from the list.

5Click the Networking tab.

The Network Settings page appears. The General tab is open.

tools config network

reference guide

85